NetWorking Wireless Technologies Test(1st)

Cisco's Unified Wireless Solution provides a mesh solution. What devices do you absolutely need to purchase to run a Cisco solution?
1. WCS
2. Controller
3. Access point
4. Bridge

1 Mark(s)

1 and 4 only
2 and 3
1 and 2
4 only

What is the maximum distance with maximum data rate for 802.11b?

1 Mark(s)

About 150 feet
About 65-75 feet
Over 200 feet
About 90-100 feet

How many non-overlapping channels are available with 802.11a?

1 Mark(s)

23
40
3
12

What is the maximum distance running the lowest data rate for 802.11g?

1 Mark(s)

About 300 feet
About 175 feet
About 350 feet
About 100 feet

What is the maximum distance with maximum data rate for 802.11a?

1 Mark(s)

Over 200 feet
About 150 feet
About 90-100 feet
About 65-75 feet

You are connecting your access point and it is set to root. What does Extended Service Set ID mean?

1 Mark(s)

That you have multiple access points, but they are placed physically in different buildings.
That you have more than one access point and they are in separate SSIDs connected by a distribution system.
That you have multiple access points, but one is a repeater access point.
That you have more than one access point and they are in the same SSID connected by a distribution system.

What is the maximum distance running the lowest data rate for 802.11a?

1 Mark(s)

About 100 feet
About 175 feet
About 300 feet
About 350 feet

What is the frequency range of the IEEE 802.11g standard?

1 Mark(s)

2.4GHz
2.4Gbps
5GHz
5Gbps

How many non-overlapping channels are available with 802.11g?

1 Mark(s)

23
12
40
3

What is the maximum distance running the lowest data rate for 802.11b?

1 Mark(s)

About 350 feet
About 175 feet
About 300 feet
About 100 feet

How many non-overlapping channels are available with 802.11b?

1 Mark(s)

12
23
3
40

What is the frequency range of the IEEE 802.11b standard?

1 Mark(s)

5Gbps
2.4GHz
5GHz
2.4Gbps

You have a Cisco mesh network. What protocol allows multiple APs to connect with many redundant connections between nodes?

1 Mark(s)

STP
IEEE
AWPP
LWAPP

What is the maximum data rate for the 802.11g standard?

1 Mark(s)

54Mbps
6Mbps
22Mbps
11Mbps

How many non-overlapping channels are available with 802.11h?

1 Mark(s)

3
40
12
23

What is the frequency range of the IEEE 802.11a standard?

1 Mark(s)

5Gbps
5GHz
2.4GHz
2.4Gbps

What is the maximum distance with maximum data rate for 802.11g?

1 Mark(s)

About 90-100 feet
About 65-75 feet
About 150 feet
Over 200 feet

In Cisco's Unified Wireless Solution, what is the split-MAC architecture?

1 Mark(s)

The split-MAC architecture allows the splitting of 802.11 protocol packets between the AP and the controller to allow processing by both devices.
The split-MAC architecture uses MAC addresses to create a forward/filter table and break up broadcast domains.
The split-MAC architecture uses MAC addresses to create a forward/filter table and break up collision domains.
The split-MAC architecture uses MAC addresses on the wireless network and IP addresses on the wired network.

NetWorking Wireless Technologies Test(1st) : Question 1 of 18